Makerbase MKS DLC32 32-bits Laser Engraver Control Board

Highlights

ESP32 Module
MKS DLC32 motherboard is an offline engraving master control board developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WiFi function, and can directly drive a 3.5-inch touch color screen.

Engraving Speed up to 8000mm/min
Thanks to the high-speed IO flip speed of the main control module and a powerful timer, MKS DLC32 can achieve a very high-speed engraving speed of 8000mm/min.

Engraving Effect
The PWM frequency of MKS DLC32 can be as high as tens of KHz (the traditional scheme is lower than 980Hz), which fully meets the needs of various semiconductor laser heads. The engraving effect is more delicate than the traditional desktop engraving scheme, and the grayscale expression is smoother.

WEB Control
Developed the WEB page, as long as you log in the IP address of the motherboard with a browser on the LAN, you can perform various engraving operations, file transfers, etc.

Support GRBLLaser and Lightburn
MKS DLC32 is compatible with GRBLaser and Lightburn computer host software.

Mobile App
MKS has also developed a supporting mobile phone APP, which can edit pictures, convert pictures into engraving files, and transfer them to the main board in addition to adding to conventional control.

Offline Engraving
Another highlight of MKS DLC32 is that it can be used offline, without connecting to a computer, you can use the 3.5-inch touch screen (not included) for control, engraving, etc., which is very convenient.

Specification