Product details
Highlights
20-24W Ultra-high Power Laser
With the most advanced six-core laser technology, Laser B1 20W has a strong 20-24W optical output power, one of the most strongest available diode-laser today and thus a much stronger cutting ability. Laser B1 20W can cut through 15mm pine, 8mm black acrylic, and even 0.1mm stainless steel in one-pass, 20mm basswood and 35mm black acrylic in multi-passes.
Highly Concentrated Laser and Stronger Cutting
With the most cutting edge laser coupling technology, Laser B1 20W has a thinner and longer focal length(50mm), yet stronger laser beam, which increase the cutting capability 20%+ stronger comparing to other 20W lasers. It can cut through 20mm basswood and 35mm black acrylic by multi-passes.
Bigger Working Frame
17.72×17.32 inches/450x440mm working area, Laser B1 20W provides a 23.75% increase in working size comparing to others, which meets the demands of most scenarios, especially ideal for A3 panels.
36,000mm/min High Speed
Laser B1 is equipped with a new 32 bit motherboard, which allows engraving speed up to 36,000mm/min, four times faster than ordinary laser engraving machines. In addition, TMC2209 silent drivers is used to effectively reduce the noise of operation, providing a faster and more enjoyable experience.
Smart Air-Assist System
Airassist pump can be automatically turned on/off. This is controlled directly by the lightburn, based on the parameters set in the program, which greatly enhances cutting ability and also significantly improves cutting precision and quality.
Multi-Color Engraving
The highenergy laser beam instantly oxidizes the metal surface, bringing 300+ rich colors to fulfill your colorful creative needs.
Eight Major Safety Protections
Eight safety protection features are installed, i.e. Move/ Flame/Offline/Motionless/Security Lock/Eye Protection/Emergency Stop Button/Zero Reset. Laser automatically shuts down when falling, flame, data disconnection and laser head freezing over 15 seconds are detected. In addition, laser head is automatically reset to zero to avoid burnout when fire. And the panoramic filter glass can effectively filter 99.8% of the laser, safer to use.
Engraving up to 1000+ Materials
With 20- 24W laser power and its strong cutting and engraving capacities, Laser B1 can cut or engrave up to 1000+ materials, such as wood, stainless steel, leather, silver, acrylic, cloth and more.
Sturdy Metal Frame
Laser B1 is made with an aluminum frame with improved mechanical designs and is very stable even under high-speed working mode. This helps to make better engraving and cutting arts.
Focus Positioning Bar
The laser module integrates a pull-down focus bar, which is easy to use, just pull down the focus bar, and move the bar towards the surface of the working panel.
XY-axis Limit Switches
Added X-axis and Y-axis limit switches can accurately locate the position of the laser module. At the same time, if the laser module moves in the negative direction of the X-axis or Y-axis, Laser B1 will trigger an alarm and stop the movement.
Laser Lens Protection
Laser module is equipped with a replaceable protective lens, which effectively prevents the smoke from polluting the laser lens, and greatly improve the service life of laser module.
Multiple Data Transfer Options
Data can be transferred via different methods of Wi-Fi, USB cable, APP and TF cards , which supports offline operations. You can use anywhere, without the limits of physical connection to a computer.
Great Software Support
Laser B1 is compatible with various mature carving software, such as LaserGRBL and LightBurn. It supports Windows 7+, macOS, Linux; engraving file formats Support JPG, PNG, BMP, G- code, GIF, SVG, NC, GC, etc.
Specification
| General | Brand: LONGER Type: Laser Engraver Model: Laser B1 20W Color: Navy Blue |
| Specification | Laser Technology: Diode Laser Technology Working Area: 450x440mm (17.72×17.32inch) Laser Wavelength: 450-460 nm Focal Length: Fixed Focus-50mm Laser Spot Size: 0.08×0.15mm Optical Output Power: 20-22W Power Max Consumption: 120W Engraver Output: DC 24V 5A Engraver Lnput: AC 110-240V, 50/60Hz Z Axis-Height Range: Up to 50mm Fastest Working Speed: Speed 36000mm/min Software: Laser GRBL on XP/7/8/10 (Free), LightBurn on Windows, Mac OS, and Linux Input Image Format: JPG, PNG, BMP, GIF, SVG, AI, etc. Connection Type: USB / TF Card / WiFi / APP Limit Switches: Yes Air Assist Interface: Yes |
| Weight & Size | Product Weight: 8.6kg Package Weight: 9.6kg Product Size(L x W x H): 727 x 668 x 244mm Package Size(L x W x H): 742 x 557 x 124mm |
| Package Contents | 1 x Laser B1 20W 1 x X-Axis Frame 1 x Rear Frame 1 x Left Frame 1 x Right Frame 1 x Front Frame 1 x Laser Module 1 x Power Cable 1 x Power Cable 1 x Safety Glasses 1 x Limit Switch 1 x Safety Glasses 1 x USB Cable 2 x Timing Belt 3 x Plywood 4 x Allen Wrench 1 x Wrench 1 x Wooden Brush 6 x Cable Tie 1 x Tweezer 1 x SD Card 1 x Card Reader 1 x Air Pump 1 x Air Valve 2 x Silicone Tube 2 x Key 1 x Desiccant 1 x User Manual 4 x M5 * 12 4 x M5 * 16 1 x M3 * 20 4 x M2 * 10 |
sh***n –
Lots to learn but for lasers in general, not because it’s this. If anything, I imagine I had an easier time with this than I would have with others I was looking at which is one reason I got it.
ky***e –
If this is your first machine, it comes with an APP, it will make the job easy. But if you are a professional, i would suggest the lightburn which is paid. overall I can’t say enough about this machine. It has been amazing and has kept him busy and out of my hair.
Ba***o –
This is the 3rd model from longer, first one was the lk5 pro and then the ray5 5watts. Now the 30watts B1 laser, i am using it as an upgrade to my ray5. This one is way more powerful and does clean cuts thanks to the automatic air assist system. All-in-all worth every penny.
No***h –
Cutting wood is tricky for a blue diode laser I did cut thin wood and acrylic in multiple passes. Still going strong after 2 months, this is a great laser engraving machine for engraving on wood and other materials.
Mo***a –
Geekbuying has been very well working with him. Bought some extensions to go on it. If you want it to cut thin wood or engrave, the 20w version is enough. But if you will mainly focus on cutting, i would suggest the 30w. That was also my choice.
Pa***s –
I use Lightburn software, still in my 30 Day Free Trail. I will purchase at the end of the 30 Days, the G-Code version at $40. You do need some kind of photo editing software to prep photos to B&W, sharpen, and erase out unneeded backgrounds for the best laser burn.
Ju***D –
The longer laser b1 comes in a long box and is well-packed. It includes all the tools necessary to assemble the laser engraver. I downloaded the trial version of Light Burn and the two together is really great. I am using the engraver in a small room that had a vent and a door to close. I just tried engraving bottles, cards, etc. It is a really great machine.
om***2 –
Assembly was easy with the instructions. Patience is key while assembling. I fired it up and it immediately homed. Using Lightburn (worth every penny!) I did my first project. I was amazed at how defined the artwork was.
Ha***h –
Let’s start with building this, estimated time 30-40 mins actual time 2-4 hours. Moving onward the laser engraver for the price is amazing. There’s a lot of settings you have to mess around with to actually get a decent cut maneuvering the speed and power. First day you get it you’ll start engraving everything from coasters to corks, to journals I even engraved my slipper which was the last straw for my wife. Now im strictly on wood. I would recommend getting the model with the acmer laser bed and you need good ventilation for cutting and protection for your table.